FPV Drone Flight Controller Accessories

  This COB LED Connecting Wire is a perfect choice for any sophisticated lighting installation. Crafted with AWG30 size and IP20 rating, it is stro...

Provide a level of sophisticated illumination to any setting with this COB LED Strip Light (5Meter Rolls) featuring 480 Chips/m and a high brightne...

Provide a level of sophisticated illumination to any setting with this COB LED Strip Light (5Meter Rolls) featuring 480 Chips/m and a high brightne...

PHB2S9000120CDNS, 2S 7.6V HV + Graphene 9000mAh 120C LiPo Battery with Hardwired T-Plug, 120C Continuous / 240C BurstPerfect for 1/10 & 1/8 sca...

YMZFPV Wireless Simulator Adapter enables USB-cable-free controller-computer connection to play simulators. It comes in tw...

Designed for the Flywoo Chasers \ Vampire-2, but can be used anywhere a micro USB is needed! Easily access limited spaces with a set of two 90° Mic...

The new filtering solution for FPV hobby, it has the perfect filtering effort on high-frequency interference generated by ESC. Protect your expensi...

A set of custom-designed and printed, ultra-soft TPE grommets to fit both your whoop AIO and your VTX in a most compact way (8.5mm tall) Fits HDZer...

A compact GPS Module from HGLRC. When you get this GPS, expect extremely fast positioning with a stable signal. All on a small form factor, you'll ...

Experience superior navigation performance with the YMZFPV M10-5883 GPS (10th gen). Fast positioning, high accuracy, and strong signal ...

Small and precise, the Holybro M10 Micro GPS with IST8310 Compass provides fast and accurate positioning with its Ublox 10th Gen GNSS. G...

The Flywoo GOKU GM10 Nano V3 Micro GPS with Compass (10th Gen) is the perfect choice for reliable navigation. This GPS weighs in at just 2.8g, and ...

Enhance your RC car, wing, and quad with FETtec Race Wire 6 3-6S RGB LEDs (2pc). Constructed with advanced FET technology and high-quality componen...

Introducing the NewBeeDrone M10Q Micro GPS w/ Compass (10th Gen)'s advanced navigation capabilities, featuring wide-range precision GPS/compass tec...

The Foxeer GPS M10Q-120 GPS & Compass is an essential tool for drone pilots, providing precise and accurate positioning information in real-tim...

The Foxeer GPS M10Q-180 offers the most precise and efficient positioning system for FPV racing drones. Boasting high-se...

The Foxeer M10Q-250 GPS & Compass offers reliable performance with its dual-module GPS and compass system. It features fast signal acq...

The Matek SAM-M10Q-5883 GNSS is a cutting-edge multi-constellation GNSS module featuring the advanced u-blox SAM-M10Q platform. It offers exception...

TuneRC Buzzer is an alarm system to help you locate your lost drone. This buzzer has a driver circuit built in, so you can connect it to any flight...

Check out the FETtec OSD Board which gives you on-screen display of important data, as well as full-tuning of KISS parameters. This board is suitab...

Check out this 2 pack of the Speedybee BT Nano 3, giving you the ability to be able to wireless configure your flight controllers and stacks. The n...

The Menace RC ON/OFF switch is capable of switching loads or auxiliary items ON/OFF by connecting to your receiver and controlling from any channel...

Note: The chip of GOKU GM10 V3 GPS is M10050. Only BF4.3x version firmware can use Ublox protocol. BF4.2x and earlier firmware can only use NMEA pr...

Note: The chip of GOKU GM10 V3 GPS is M10050. Only BF4.3x version firmware can use Ublox protocol. BF4.2x and earlier firmware can only use NMEA pr...

Note: The chip of GOKU GM10 V3 GPS is M10050. Only BF4.3x version firmware can use Ublox protocol. BF4.2x and earlier firmware can only use NMEA pr...

LED Race Wire with 4 programmable LEDs per board.  Each pack comes with 4 race wires.  Add customizable lights to your builds.  Connects between mo...

A spare set of hardware for your BeeBrain or regular Inductrix flight control board. Check out our AIO flight controllers, as well as the rest of o...

The RUSHFPV Blade Power Filter Board Lite was created to help ESCs achieve complete filtering due to its compact structure and high power. This spi...

An unbelievably tiny GPS module, get even the smallest of quads linked up to satellites with this little guy! Check out our GPS selection! Specific...

The renowned ImpulseRC Race Wire, now for the 4" Micro Apex frame! Check out the ImpulseRC Micro Apex Frames and Accessories Collection and our ful...

Clean up your video during those high throttle punch outs with this high quality Rubycon Capacitor from Japan. Check out all our Low-ESR capacitors...

LED Kit for the FlyFive33 Tiny Trainer Check out all our LEDs, and all our TinysLEDs products! Specifications Weight: 3.49g Includes 1x Whoop Po...

How do you mount LEDs to the side of a quad? It has always been a challenge until now! Just Slide these on like a saddle on a horse. Easy to instal...

Tiny's RaceLiteWires Minis are race wires with the addition of configurable RGB LEDs that get brighter the harder you send it! Also available in fu...

Tiny's RaceLiteWires are racewires with the addition of configurable 5050 size RGB LEDs that get brighter the harder you send it! Also available in...

Pack of 2 interference isolation shields for 20x20 and 30x30 stacks. Place this in your stack between your FC and 4in1 ESC, and solder one of the s...

Some drones like DJI models are installed with GPS that only provide you the craft location, with the sound help, you can find your lost drone prec...

A great way to reduce the amount of unwanted noise that makes it to your gyro. When used properly, this is a simple way to make your quad fly bette...

Replacement XT30 pigtail with capacitor for the Sailfly-X & Mobula7 HD, or anything using an XT30! Check out the rest of our parts and accessor...

The iFlight 5V/12V Step Down Micro BEC features high-efficiency synchronous rectification and the ability to step down from a wide input voltage ra...

Plug in your VTx at any time with 0 power start-up! Check out all our LEDs, and all our TinysLEDs products! Features Plug in your VTx at any time ...

Can be used with any 8 pin stacks, just make sure to re-pin when necessary! Specifications Length: 72mm end to end Includes 1x Airbot 4in1 ESC t...